or is it this procedure from the RELEASE NOETS...
=============================================================================
INSTALLATION PROCEDURE
=============================================================================
1. Ensure BMC release 00.42 or later is pre-installed before attempting this
FRU/SDR update.
2. Copy all files in the SUP to a USB key
3. Now execute the following command to bring up the main FRU/SDR load menu:
Run startup.nsh
or
Run FRUSDR21 in the EFIScripts folder
4. Select the option which is applicable to what you want to do. On a brand
new baseboard I would highly recommend to run option 3 to program both
the FRU and SDR. By reprogramming the FRU you will be given the option
to input data from the keyboard into various chassis, board and product
areas. Ensure that you select the correct chassis from the chassis
selection menu otherwise your fan sensors will not be configured
properly.
5. Once the FRUSDR update is complete, it is recommended that power off the
system and apply a AC cycle.