I got dfu-util.exe from here linked in this post. It looks working as you see below.
Though I did not put any option on flashall, it seemed doing flashall -b.
C:\Users\vjou\Intel_edison\Software\edison-image-ww36-14>flashall Using U-boot target: edison-blank Now waiting for dfu device 8087:0a99 Please plug and reboot the board Dfu device found Flashing IFWI Download [=========================] 100% 4194304 bytes Download done. Download [=========================] 100% 4194304 bytes Download done. Flashing U-Boot Download [=========================] 100% 245760 bytes Download done. Flashing U-Boot Environment Download [=========================] 100% 65536 bytes Download done. Flashing U-Boot Environment Backup Download [=========================] 100% 65536 bytes Download done. Flashing boot partition (kernel) Download [=========================] 100% 5799936 bytes Download done. Flashing rootfs, (it can take up to 5 minutes... Please be patient) Download [=========================] 100% 536870912 bytes Download done. Rebooting U-boot & Kernel System Flash Success... Your board needs to reboot twice to complete the flashing procedure, please do not unplug it for 2 minutes. |