Hi,
I have a used DH67BL board. The previous owner already used it with this failure.
The problem: in every start, it writes an intrusion message.
What I did:
- newest bios, it was earlier
- clr cmos
- intrusion header is open (by the manual, the opened case closes it)
- intrusion header pins: grnd ok, signal 2,93 volt - seems to be ok
- in bios, in configuration, event log deleted, logging disabled, in security intrusion: disabled
- cmos battery ok
- CPU: G1620, the previous owner used it with an i3-2120
- RAM: 1x 2gb
- tried to close the intrusion header, too
But the problem is still not solved.
Any idea?
Thanks