Re: clloader in a Linux Base Image (clanton-full) build not working?
Hi Liam, I understand you are using ssh/scp now so you don't really care any longer. Still wanted to comment on Arduino IDE eglibc toolchain on Windows. Maybe still of interest for someone. Below steps...
View ArticleClik here to view.
opencv versus toolchain versus yocto
First of all, let me tell you guys something.. this yocto build that takes hours, dependence of internet connection, a bunch of package that must be pre-installed in the desktop, and a lot of...
View ArticleRe: Multiple BSOD in DWM.exe for Haswell HD4600
I have a cross-post over on TechNet trying to figure this out...BSOD in DWM with Intel Haswell HD4600 The OS is Windows 7 Ultimate sp1 and all relevant updates are applied. I updated all drivers and...
View ArticleRe: After bios update resolution on BIOS screen is much lower and lost NUC...
Can't set full sized screen like before bios update.But hope this help someone if need. To workaround about splash screen can setup the "Expansion Card Text" to "Enable" on "Boot configuration", it's...
View ArticleRe: After bios update resolution on BIOS screen is much lower and lost NUC...
That's actually intentional if you can believe it. There was an issue with some of the NUCs not displaying the boot screen on some older monitors. One of the things the new bios does to correct that...
View ArticleRe: Intel NUC D54250WYKH Memory issue
Hello Sylvia,I actually see this problem right now and have the latest version of the BIOS on my D54250WYKH. I am currently using the following memory as specified in the URL you provided to LoPuS in...
View ArticleRe: SS4000-E 100% Full Can't access data, enable FTP, or SSH
Your reply is great. I did order a $6.00 cable dt10 to Db9 I did this Monday should be here today (got to love Amazon prime) but yes what your telling me to do below is my EXACTLY Next steps. I just...
View ArticleD54250WYK, displayport 1.2 dual monitors and Ubuntu (trusty tahr)
Hello All, I recently purchased a D54250WYK and have since updated the BIOS to the 0025 (currently latest) version. I also purchased an EVGA displayport hub (200-DP-1301-L1) and a 1.2 DP cable...
View ArticleRe: Data migration partially completed, then migration software doesn't...
It turns out that the power cord to the Sabrent drive adapter was slightly unseated - I must have bumped during the migration and lost connectivity. Re-seating it properly caused everything to go as...
View ArticleMotherboard
my motherboard is intel dh61sa my motherboard not installing lan driver for windows server 2003 operating system plz send me the solution.
View ArticleClik here to view.
Re: NUC Haswell reboots after shutdown
Hi, I've the Intel NUC DN2820FYKH and the latest BIOS for it- 0032. These are my "Power settings in Visual BIOS : "After Power failure : Stay off" "Wake on Lan : Stay off" "Wake on USB S4/S5: Enabled"...
View ArticleUnable to load the My Wifi Technology DLL file
Hi,I have searched the forums and cannot find anything current about the problem I am having, nor can I find any solution. I have had my laptop for 4 years and finally realized I have Intel Wireless...
View ArticleRe: HOW DISABLE VERTICAL SYNC USING COMMANDLINE OR REGISTRY?
May 2014, still no fix Best customer care prize goes to... INTEL
View ArticleLogitech K400 keyboard laggy and jumpy on my i3 NUC
Hello, I received my Intel® NUC Kit D34010WYK a few days ago and I can't get my wireless Logitech K400 Keyboard/mouse to work well. There is a huge lag when using the mouse pad, and key presses are...
View ArticleRe: Can anyone tell me how to stop unwanted emails
Thanks Mark for your efforts. I still got some emails this morning which hopefully were from before the new upgrade also I will go into my settings in case anything needs to be updated.
View ArticleRe: DN2820FYKH doesn't react on USB keyboard or mouse input after resume
Does reverting to BIOS 0028 solve the problem for you? It did for me, running under Debian 'Jessie':DN2820FYKH no USB mouse after sleep (under Debian 'Jessie')
View ArticleRe: Logitech K400 keyboard laggy and jumpy on my i3 NUC
LoL, Ok so I just tried a third set of batteries, bam! Works perfectly. And companies trust me with multimillion dollar equipment all day long. Scratch that, it started acting funny again. I think it...
View ArticleRe: firmware upgrade won't work---POSIX paths???? CYGWIN environment...
Hi bjkellett, Since the IDE is not doing a firmware update as it should. Try to upgrade the firmware manually. Download the firmware from the following link LITTLE LINUX IMAGE Firmware Update for Intel...
View ArticleRe: Intel centrino wireless-n 2230 keeps dropping connection.
Same issue here. Dell XPS 18 that was recently purchased and still covered under return policy, thankfully. Noticed issued around the same time as I upgraded to Windows 8.1 but that could be a...
View Article