Re: IM trying to update my intel hd Graphics but im have a difficult time
Download driver in zip format and force instalation in windows at your risk
View ArticleRe: Intel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
Is there an answer to this yet? I'm having a similar issue with mine using a Western Digital Red WD10JFCX drive. I thought that maybe it was just the drive so I hooked a 500GB Seagate Momentus XT...
View ArticleRe: Intel NUC D54250WYKH not recognizing 2.5 SATA drive (Samsung M9T)
Same here. I have a Crucial mSATA I run the OS off of. But whatever is wrong with the controller for the 2.5" was crippling my system like crazy. For the last couple of days I've had the WD Red drive...
View ArticleIs there a device to safely shut down the NUC on power failure?
I am building a guitar pedalboard with an NUC running audio software. I would like to rig up a way to safely shutdown or hibernate the NUC when I kill the power using the 120VAC switch I'll install on...
View ArticleWireless card stops working after hibernate with 17.1.0.0
I just updated to 17.1.0.0 and found that now my wireless card no longer works after I resume from hibernation! I have a Dell XPS 15-9530 running Windows 8.1 Update x64 with an Intel Dual Band...
View ArticleRe: Can wifi be placed in AP mode?
Is it just me or is this document missing key information describing what action was taken to put the Edison into AP mode? Also, it is nearly impossible to find any examples or information for the mini...
View ArticleEdison Mini-BreakOut Board Documentation Woes...
Firstly, love the Edison form factor and capabilities thus far... but I really hope to see the documentation improve so that a real community can for around this platform. On to my question(s). Since...
View ArticleRe: Problem to connect wireless keyboard and mouse to the USB3 connections
Hello, Any updates yet? Kind regards,Chris
View ArticleHow can I manually unmark my RAID5 array as "rebuilding"? Intel X79/Asus...
I have the exact same problem as was discussed in this thread: ICH10R - RAID 5 - Problem replacing failed drive However, the array that is in "rebuild" mode is my Windows 7 boot volume, so I cannot...
View ArticleRe: Bluetooth not enabled?
Great work, just need a little help. When I get to the "scan on" bit nothing is displaying in here. I made the default-agent to NoInputNoOutput and KeyboardDisplay and both have no luck. Ashish
View ArticleIs it possible to call fastDigitalWrite from a C program running in Linux
I would like to write a C/C++ program, which calls fastDigitalWrite(), and runs in linux on the Galileo rather than as an Arduino sketch. Is this possible? I have been able to write an Arduino sketch...
View ArticleRe: Failed to access the USB through python.
According to the output of lsusb, maybe i have to add the card-reader's driver package? The ACR122U card reader driver package need the pcsc-lite and libusb to be successfully compiled. Any suggestions?
View ArticleDifficulty locating chipset update file for Intel® 6, 5, 4, 3, 900 Series...
I ran the Intel Driver Update Utility and it recommends that I update the chipset driver. However the file was moved and I don't know which file to choose. Can someone tell me which driver to get? The...
View ArticleRe: Intel Gelelio Not Recognized When I use RS-232
Oh, I am so sorry. I've completely forgotten this post as I cannot find it under my profile. In reference to Diego's reply, I've managed to get the cable which was custom made. But it was not working,...
View ArticleRe: Cannot Acecss Galelio LINUX OS
When I got the custom made RS232, I asked the hardware person to make it for me since I don't have the necessary materials to cut it. And the cable colours are all different from whatever examples that...
View ArticleRe: WiFi Latency
I can't yet offer you a solution but what I can do is help validate what you are seeing. Below are some sample ping times for my edison on wifi (802.11n network). Other wireless devices in the house...
View ArticleWhy is connmand soaking up 25% of my galileo CPU?
connmand seems to be the 1st entry most of the time when I run "top":root@GalileoEnet:~# top Mem: 110224K used, 127844K free, 0K shrd, 6820K buff, 83480K cachedCPU: 40% usr 60% sys 0% nic 0%...
View ArticleRe: Suitable SD voltage level translators?
I had seen the limitation on pull up resistor value, and had intended to use 100k pull ups. Unfortunately, I missed the fact that DAT3/CD can have a smaller pull up on the SD card side. I like the...
View ArticleRe: Suitable SD voltage level translators?
Yes, the internal pullups should be fine. Just make sure that you tie the OE pin to VCC, so that the pullups are active as soon as the board gets power. If OE is low then you don't get any pullups.
View ArticleRe: Do I need to replace the antenna?
No I haven't gotten it yet I plan on ordering it this week and then as soon a I install it I will let you know how it goes.
View Article