Need help with core i5 processor upgrade.
Hi, thank you in advance for anyone willing to help me address this problem. I am at a dead-end with my knowledge (and budget) and do not want to keep buying new components without knowing for sure if...
View ArticleRe: DH61AG Audio header plug
Hi there thanx again for your help. One more question. How does the sense work on this port? In the Hd audio there were sense and returns. this connector only has sense. Does the sense get connected...
View ArticleRe: DP67BG no boot - POST code 1E
I hope this will help anyone with this problem.The main cause for the problem is board DP67BG does not support processor with Lithography 22nm. Solution is to install a cpu with 32nm then update bios...
View ArticleIntel HD 4000 not compatible with PixelShader?
Hey Guys, Maplestory along with Combat Arms are starting to move over to PixelShader. The mech suits in Maplestory were retextured using PixelShader, and ever since that, I haven't been able to see...
View ArticleRe: Monitor does not sleep with latest Intel GFX drivers
Kevin, tried with 1 single monitor on HDMI and then one single monitor on DVI. Yields the same non sleep results. Monitors go black but never go into deep sleep or shut off. I'm also going to review...
View ArticleRe: Monitor does not sleep with latest Intel GFX drivers
Just tried turning on all sorts of power saving functions of the BIOS. Something called ASPM and a few other things to deal with the PCIe Bus but none of the changed anything.
View ArticleRe: DH61AG not detecting mini pcie cards after bios update
This happenned to me before as I noted it in ( http://communities.intel.com/message/193837 ). Any news from the engineers? In my case the warranty is still valid. How do I proceed for RMA ? Thanks...
View ArticleRe: Monitor does not sleep with latest Intel GFX drivers
Look this is not an error on the user side , it's on Intel's side so they have to go and correct it, I hope they are doing that now.
View ArticleRe: Monitor does not sleep with latest Intel GFX drivers
Yes, I believe you are correct. I would have never seen this unless my AMD 6950 went out on me and am currently shopping for a replacement.
View ArticleRe: DH61AG | new gen. Bios 105 breaks TV Card recognise
This happenned to me too ( http://communities.intel.com/message/193837 ) and would like to know what the engineering department has discovered about our problem. As I mentioned in my previous post,...
View ArticleRe: Help with i7 3517U
Hello, The Intel® Core i7-3517U processor’s normal clock speed is 1.9 GHz. The maximum Turbo boost frequency is 3.0GHz. Please note that Intel® Turbo boost is engaged automatically depending on...
View ArticleRe: No display, No Beeps on DH61WW
Hello Sampath,Have you preformed any BIOS updated lately? Which is the current BIOS version of your motherboard? Any chance made on BIOS on these days? You may want to test the system out of the...
View ArticleRe: Intel HD 4k, pixel clock limited by Samsung?
Have you tried using a direct HDMI cable connection? Have you tried loading the latest drivers from Acer for this monitor?http://us.acer.com/ac/en/US/content/drivers In addition, check with Samsung...
View ArticleRe: DZ77BH-55K doesnt post with two sata drives
Hello Lasercat,It could be an issue related to the Boot order selected on the BIOS. So please go to the “BOOT” tab and check under the "Boot Driver order", if the hard drive with the Operating System...
View ArticleRe: DZ77BH-55K doesnt post with two sata drives
Hi, When I boot with my 1 OS hdd it shows it on top, when I boot with the 2 drives, I cannot get into the BIOS. Ty for your time.
View ArticleRe: DZ77BH-55K doesnt post with two sata drives
Are you able to see something on the screen? Any error code?Which power supply are you using?Is there fan activity?Are the hard drives spinning? Regards.
View ArticleR1208BB4GS9 will not boot
I have a new R1208BB4GS9 server that I am building. Today I installed memory and CPUs and then tried to power up the system. The fans start to spin up and as they are really getting going, the system...
View ArticleRe: Advanced tab on 82579v driver not present
Mark, I'm experiencing similar difficulties with the latest 82579V driver, dated 2/21/2013, version 12.6.45.0. These properties are listed for the network adapter properties. The version that was...
View ArticleRe: Advanced tab on 82579v driver not present
Hi Jerry,Are you missing the "Link Speed" tab, but you can see the "advanced" tab on the adapter properties I'm not sure which board you have, but I can direct you to the latest generic...
View ArticleRe: Advanced tab on 82579v driver not present
I tried uninstalling 17.4.95.0 and reinstalling 18.3.x.x and got the same result. Here is the dialog I am seeing: http://imgur.com/8UcY7kR As you can see, there are only a few options available. I...
View Article